Sale!
In Stock

4ms Shaped Dual EnvVCA Analog Envelope/VCA/Waveshaper Eurorack Module (20 HP)

Original price was: $607.99.Current price is: $98.00.

SKU: VC84643933589 Category:
  • Free Delivery Over $30 All Products
  • 30 days easy returns if you change your mind
  • Order before noon for same day dispatch
Guaranteed Safe Checkout

Description

4ms 4MSHEV Overview

  • 1Description
  • 2Envelop Circuit
  • 3VCA Functions
  • 4Eurorack Ready

Dynamically control and shape your Eurorack audio signals with the 4ms Shaped Dual EnvVCA, a dual analog envelope generator, waveshaper, slew limiter, and VCA. Each of the two channels is identical, and they can be used separately or together. The waveform of each envelope can be controlled with a slider or CV without changing the envelope timing.

The module’s wide time range and plethora of CV inputs and attenuverters allow it to be used as an LFO, audio-rate oscillator, slew limiter, waveshaper, ASR/ADSR/complex EG, independent audio/CV VCA, envelope follower, side-chain processor, and general utility module. The Shaped Dual EnvVCA ships with a ribbon power cable and mounting screws.

Envelop Circuit

  • 100% analog
  • Versatile linear, exponential, and logarithmic envelope generator/LFO
  • Low-noise, low-distortion, DC-coupled linear VCAs
  • Shape Slider, CV Jack and Attenuverters for fading between Exponential, Linear and Logarithmic envelope shapes without changing the envelope timing
  • Sliders and Range switches control Rise and Fall times from ~2 ms to > 2 minutes
  • Time CV jack extends time range: ~400 s (2.5 kHz) to ~1 hour
  • Independent attenuverters for Rise and Fall time
  • Blue/Red LEDs indicate strength and polarity
  • Cycle buttons for looping envelopes (LFO)
  • Trigger input jack and switch for toggling between AR, ASR, and Cycle modes of triggering
  • EOR/EOF (End of Rise / End of Fall) gate outputs can be used to chain and sequence events
  • Env Level and Offset knobs scale and shift Env Out without changing VCA volume

VCA Functions

  • Audio In and Out jacks for passing audio or CV through the VCA
  • VCA CV inputs to use VCAs independently from the envelopes
  • VCA gain internally connected to envelope output when VCA CV jack is left unpatched
  • Follow input jacks allow for slew limiting, ADSRs, and exotic filtering effects
  • Retrig jumpers allow for retriggering during rise phase

Eurorack Ready

  • 20 HP Eurorack format module
  • Maximum Depth: 0.95″ (24mm)
  • Includes power ribbon cable with 10-pin Eurorack power header
  • Power consumption: +12V: 255mA, -12V: 230mA

In the Box

  • 4ms Shaped Dual EnvVCA Analog Envelope/VCA/Waveshaper Eurorack Module (20 HP)
  • Eurorack Ribbon Power Cable
  • Set of Mounting Screws
  • Limited 1-Year Manufacturer Warranty

Not in the Box

  • Essential Eurorack Cases (Not Included)

User Manual

2.2 MB

    Table of Contents

    • Description
    • Envelop Circuit
    • VCA Functions
    • Eurorack Ready

    4ms 4MSHEV Specs

    Key Specs

    Sound Generation Analog
    Audio I/O 2 x 1/8″ / 3.5 mm TS Unbalanced Mono Instrument Input
    2 x 1/8″ / 3.5 mm TS Unbalanced Mono Instrument Output
    CV/Gate I/O 10 x 1/8″ / 3.5 mm TS CV/Trigger Input
    7 x 1/8″ / 3.5 mm TS CV/Trigger Output
    Eurorack Current Consumption 255 mA on +12 V Rail
    230 mA on -12 V Rail
    Horizontal Pitch 20 HP

    General

    Item Type Eurorack Module
    Sound Generation Analog
    Keyboard No
    Expression Controls No
    Number of Pads No
    Display No

    Sounds

    Maximum Polyphony Not Specified by Manufacturer
    Built-In Effects Yes
    Built-In Speaker Yes

    Synthesis

    Oscillators No
    Mixer No
    Amplifiers 2 x VCA
    Envelopes 2 x Assignable Envelope Generator: Attack, Release
    Filters No
    LFOs Number of LFOs: 2 x Global

    Sequencing & Recording

    Sequencer No
    Arpeggiator No

    Connectivity

    Audio I/O 2 x 1/8″ / 3.5 mm TS Unbalanced Mono Instrument Input
    2 x 1/8″ / 3.5 mm TS Unbalanced Mono Instrument Output
    Pedal Support No
    MIDI I/O No
    CV/Gate I/O 10 x 1/8″ / 3.5 mm TS CV/Trigger Input
    7 x 1/8″ / 3.5 mm TS CV/Trigger Output
    Control Voltage Level VCA CV In: 0 to +5 V
    EG CV Out: -10.1 to +10.2 V
    Trigger : +1.2 V
    Patch Points No
    Sync I/O No
    Network I/O No
    USB No
    Media/Memory Card Slot No

    Audio Performance

    I/O Impedance Inputs:
    100 Kilohm
    Outputs:
    1 Kilohm
    Maximum Input Level +2 dB
    Maximum Output Level 10 V p-p
    Included Software No
    Mobile App Compatible No
    *As of July, 2023: Check with manufacturer for the most up-to-date compatibility

    Power

    Power Requirements Eurorack Power
    Eurorack Current Consumption 255 mA on +12 V Rail
    230 mA on -12 V Rail

    Physical

    Color Black
    Horizontal Pitch 20 HP
    Included Accessories No

    Packaging Info

    Package Weight 0.61 lb
    Box Dimensions (LxWxH) 6.1 x 4.3 x 3.1″

    All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.

    Reviews

    There are no reviews yet.

    Be the first to review “4ms Shaped Dual EnvVCA Analog Envelope/VCA/Waveshaper Eurorack Module (20 HP)”

    Your email address will not be published. Required fields are marked *